We Are Experts In Relocating Boats Nationwide.
At Aloha Transport we are fully licensed and up to date on the requirements of each State and Federal DOT regulations for boat transportation. More importantly, we understand the planning needed to get your vessel moved from one location to the next. Each state has it own rules that must be followed. The permits needed can vary from state to state. It can be a overwhelming for you just trying to keep up with it all. With our boat transport service, your boat move is Hassle Free from pick up to delivery. You can ready your vessel for safe passage by looking over one of our many guides. They are full of tips and the basic steps needed to get your boat ready for travel. We look forward to exceeding your expectations. Aloha Transport USA is ready to handle your vessel today, so call us to get started.
We use the most experienced drivers that are experienced and trained at loading and unloading a variety of boats. We bring 20 years experience working with DOT, permit agencies, marinas, boat yards, and ports. We understand how to handle costly delays and are up to the challenge than many boat shippers pass on.
FAST FREE QUOTE!
Fill out and submit the quick-form below; we’ll get back to you ASAP!
Proper boat preparation is an important part of getting your boat ready for hauling.
- Make certain that all loose items in your vessel such as plates, galley utensils, personal items or any other non-secured items have been secured or removed from the vessel.
- Empty all fuel and water from the vessel.
- Disconnect all battery cables.
- Remove any device or fixture that extends beyond the hull of the vessel such as antennas, radar, compasses or depth sounders. These devices should be secured inside the vessel for shipping.
- Secure decor such as tops, curtains, seat cushions.
- Remove the plug from the craft.
- You will need to store and secure plastic and plexiglass windshields below.
- If you are moving the boat during the winter months, then you need to winterize the engine, toilets, the water systems or any other weather sensitive device on the vessel.
- Shrink wrap is an excellent way to protect your boat during transport. However, a poor shrink wrap may tear due to the high winds generated by road travel. If this happens, the vessel could suffer damage from the shrink wrap beating, chaffing and scratching the vessel. Aloha Transport USA can not accept responsibility for damages caused by improper shrink wrap.
- If your larger boat needs to be loaded transom forward, then the craft needs to be shrink wrapped or we cannot accept liability for damage that may occur to the windshield during transport.
- When moving a sailboat, you must remove all standing rigging, lights, spreaders, wind indicators and all other types of mast rigging prior to transport. Otherwise, Aloha Transport cannot assume liability for damage such as scratches or abrasions that may occur on the mast or damaged rigging or lights left on the mast during transport.
- All personal belonging should be removed from the boat before transport. These include cash and valuables, clothing, sporting goods or any other materials that are not part of the vessel.
Proper boat preparation is an important part of getting your boat ready for hauling.
- Make certain that all loose items in your vessel such as plates, galley utensils, personal items or any other non-secured items have been secured or removed from the vessel.
- Empty all fuel and water from the vessel.
- Disconnect all battery cables.
- Remove any device or fixture that extends beyond the hull of the vessel such as antennas, radar, compasses or depth sounders. These devices should be secured inside the vessel for shipping.
- Secure decor such as tops, curtains, seat cushions.
- Remove the plug from the craft.
- You will need to store and secure plastic and plexiglass windshields below.
- If you are moving the boat during the winter months, then you need to winterize the engine, toilets, the water systems or any other weather sensitive device on the vessel.
- Shrink wrap is an excellent way to protect your boat during transport. However, a poor shrink wrap may tear due to the high winds generated by road travel. If this happens, the vessel could suffer damage from the shrink wrap beating, chaffing and scratching the vessel. Aloha Transport USA can not accept responsibility for damages caused by improper shrink wrap.
- If your larger boat needs to be loaded transom forward, then the craft needs to be shrink wrapped or we cannot accept liability for damage that may occur to the windshield during transport.
- When moving a sailboat, you must remove all standing rigging, lights, spreaders, wind indicators and all other types of mast rigging prior to transport. Otherwise, Aloha Transport cannot assume liability for damage such as scratches or abrasions that may occur on the mast or damaged rigging or lights left on the mast during transport.
- All personal belonging should be removed from the boat before transport. These include cash and valuables, clothing, sporting goods or any other materials that are not part of the vessel.